Ford Escape Automobiles Forum banner

TSB 12-4-3 - LIFTGATE DIFFICULT TO OPEN OR CLOSE

3K views 0 replies 1 participant last post by  thesavo 
#1 ·
TSB 12-4-3
LIFTGATE DIFFICULT TO OPEN OR CLOSE-BUILT ON OR BEFORE 3/2/2011
FORD: 2008-2011 Escape
MERCURY:2008-2011 Mariner

ISSUE
Some 2008-2011 Escape and Mariner vehicles built on or before 3/2/2011 may exhibit a liftgate that is difficult to open or close.

ACTION
Follow the Service Procedure to correct the condition.

SERVICE PROCEDURE
This may be caused by the position of the liftgate striker in relation to the latch.
1. Remove liftgate striker.
2. Place flat washer under striker.
3. Reinstall striker. Refer to Workshop Manual, Section 501-03 for Torque Specification and adjust as needed.

PART NUMBER
W716082-S900
PART NAME
Washer - Flat

WARRANTY STATUS:
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB.
Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

OPERATION
120403A

DESCRIPTION
2008-2011 Escape And Mariner: Install Flat Washer . Includes Time To Remove And Install The Striker And Adjust If Necessary (Do Not Use With Any Other Labor Operations)

TIME
0.3 Hr.

DEALER CODING

BASIC PART NO.
7843150

CONDITION CODE
42
 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top