2011 Black AWD Limited

Post your pictures here!

Re: 2011 Black AWD Limited

Postby frospike38 - December 3rd, 2014, 1:50 pm

mkyle38 wrote:
frospike38 wrote:Has anyone ever used the vinyl for tinting taillights/headlights?? I'm not looking for a permanent tint right now

I tried to and well, it took about 30 seconds before I threw it in the trash. Too hard to work with unless you have experience. The Niteshades look better and aren't necessarily permanent. I had to redo mine due to the wind kicking up dust in my garage. You'll need 2 cans of this http://mobile.walmart.com/ip/17209313. Has to be the spray paint type can. 1 can for each tail light and all you have to do is literally just hold the spray nozzle down continuously and the Niteshades will run right off. Rinse with water and your good to go.

Ohhhh!! I had no idea you could remove that nightshade stuff. Thank you
User avatar
Posts: 100
Congratulations on reaching 100 posts!
Joined: August 27th, 2014, 1:26 pm
Location: Illinois

Remove Advertisements


Re: 2011 Black AWD Limited

Postby mkyle38 - December 4th, 2014, 1:33 am

Go to YouTube and search "how to remove VHT Niteshades" and there's a few videos on there of it being done.
2011 Ford Escape Limited AWD - Tuxedo Black
*Black Projector Halo Headlights
*6000k Low Beam HID Kit
*Tinted Tail Lights
*iPad Mini Installed In Dash
Posts: 21
Joined: July 17th, 2014, 6:16 pm
Location: Minneapolis, MN
My vehicle: 2011 Ford Escape Limited AWD

Re: 2011 Black AWD Limited

Postby Meatloafmountain - December 19th, 2014, 7:31 pm

It's interesting how my bulbs/housing and lights look blue in pictures, but in reality it's not as drastic.

Great looking E! :thumb:
* Blackhorse Grilleguard - Blackhorse Taillight Guards - Plasti-Dipped stock wheels - Plasti-Dipped grille - Spyder Headlights - Dawn Bodyside Molding - LED light bar - Ford Spoiler - Debadged - LED foglights - Tribute taillights - WeatherTech Lampguard Covers - Plasti-Dipped gas door - front air dam removed
* WeatherTech Floor and Cargo mats - Saddleman Seat Covers - various Plasti-Dipped interior pieces
* K&N air filter - Magnaflow exhaust
* front strut tower bar - Moog Front Sway Bars - KYB Struts - H&R 1 inch Lift Springs, Front & Back - KONI Rear Shocks
* Optima Yellow Top battery

UpComing Mods / Repairs / Projects:
The Retrofit Source 2nd Gen Fog Light Thread | FTS 4X4 Adjustable Rear Lower Control Arm

Consolidated War Wagon Build Thread
Off Roading Thread
YouTube Offroading Channel
User avatar
Posts: 998
Joined: December 24th, 2013, 3:30 pm
Location: Anchorage, Alaska.
My vehicle: 2012 Ford Escape XLT V6 AWD
My vehicle's name: War Wagon

Re: 2011 Black AWD Limited

Postby TexasGator - December 20th, 2014, 8:41 pm

Love your truck. Looks like you've put a lot of quality work into it. It's all well done and very tasteful. :yes:


    K&N Air Filter | EBC Green Stuff Pads | EBC Vented Rotors | CarField Strut Tower Brace | 245/75R16 BF Goodrich T/A KO2's | Limited Roof Rack | Limited Rear Lift-Gate Trim | Limited Fog Lights |JBL MS-62C 6.5" Component Speakers | Polk DB521 Rear Speakers | 2 Dayton Audio NS270-44 10" Neodymium Low-Profile DVC Subwoofers | Pioneer GM-D8601 Class D Mono Amplifier | Pioneer GM-D8604 Class FD 4-Channel Bridgeable Amplifier | XS Power D1200 AGM Battery | Scosche EFX Battery Terminals | Husky WeatherBeater Floor Mats | Black Gorilla Lug Nuts | Drake Off Road Billet Antenna | Black Billet Fender Washer Kit | Custom 2.5L Engine Cover | Gunmetal Billet Oil Cap | Super Bright LED's 194 LED Bulb w/ Focusing Lens Reverse Lights | ProBolt Black Engine Bay Nuts | Yakima Front Loader Bike Rack | Custom Black Plasti-Dip Accents | Custom Black Painted Rotors, Calipers and Drums | Custom Black Painted Engine Covers and Oil Dip Stick | Gator Badge
User avatar
Posts: 547
Congratulations on reaching 500 posts!
Joined: September 6th, 2012, 12:50 am
Location: San Antonio, TX
My nickname: Gator
My vehicle: 2011 Ford Escape XLS

Re: 2011 Black AWD Limited

Postby JaketheMan - January 1st, 2015, 6:44 pm

Hey mkyle38 can you direct me to the kit you used for the low beams, and how are they installed?

Mods: Pirate Bobblehead, WeatherTech Floormats, Custom Exterior and Interior Paint, Black Grille Inserts, 18" Verde Skylon Wheels, 20% Front Window Tint, Anzo Headlights.
User avatar
Posts: 148
Congratulations on reaching 100 posts!
Joined: June 29th, 2012, 6:01 pm
Location: Springfield, Missouri
My nickname: Batman
My vehicle: 2010 Ford Escape XLT
My vehicle's name: Brooklyn

Re: 2011 Black AWD Limited

Postby Buran - November 19th, 2016, 12:48 am

I'd love to see the back side of the headlights on both sides. I have the spyder headlights now. Now that I've got projectors, I would install LEDs or HIDs if I was confident that they'd work well.
User avatar
Posts: 22
Joined: May 21st, 2016, 9:29 pm
My vehicle: 2011 Ford Escape Limited FWD


Return to Pictures

Who is online

Users browsing this forum: No registered users and 8 guests